Table of Contents
Advertisement
w w w . e l a t i o n l i g h t i n g . c o m
F I X T U R E M E N U
ON-BOARD SYSTEM MENU
The DESIGN WASH LED ZOOM™ comes with an easy to navigate system menu. The
next section will detail the functions of each command in the system menu.
LCD MENU CONTROL PANEL
The DESIGN WASH LED ZOOM™ control panel (see image below) located on back of
the fixture offers several features to select form such as setting the DMX address,
running pre-programmed macros, changing display options, and resetting the
fixture to factory defaults. There are (4) buttons, which are explained below.
[MENU] Press this button to enter the fixture menus and to return/exit to the previous
menu. The display will automatically exit the fixture menus in 10 seconds from the last
button press.
[UP] [DOWN] Press these buttons to navigate through the different menu functions
and access sub-menu selections.
[ENTER] Press this button to select a menu item and press again to confirm your
selection.
NOTE: To access the LCD Menu Control Display via the internal battery when the
fixture is not powered, press either the UP or DOWN buttons. The LCD Menu Control
Display will shut OFF automatically about 10 seconds from the last button press.
17
DESIGN WASH LED ZOOM™ User Manual ver 1
Advertisement
Table of Contents
