Fixture Installation - Elation DESIGN WASH LED ZOOM User Manual

Table of Contents

Advertisement

F I X T U R E I N S T A L L A T I O N
C A U T I O N S
• For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
• Ambient operating temperature range for this fixture is 5°F to 113°F (-15°C to 45°C).
Do not use the fixture under or above this temperature.
• Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture. (210 lbs / 95 kg)
• Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable.
• Never stand directly below the device when mounting, removing or servicing.
MOUNTING
The DESIGN WASH LED ZOOM
hanging upside-down from a ceiling, or set on a flat level surface (see illustration on
the next page). Be sure this fixture is kept at least 1.5 feet (0.5m) away from any
flammable materials (decoration etc.). Always use and install the supplied safety
cable as a safety measure to prevent accidental damage and/or injury in the event
the clamp fails.
F L A M M A B L E M A T E R I A L W A R N I N G
Keep fixture at least 5.0 ft. (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L C O N N E C T I O N S
A q u a l i f i e d e l e c t r i c i a n s h o u l d b e u s e d f o r a l l
e l e c t r i c a l c o n n e c t i o n s a n d / o r i n s t a l l a t i o n s .
is fully operational in two different mounting positions,
w w w . e l a t i o n l i g h t i n g . c o m
10
                    DESIGN WASH LED ZOOM™ User Manual ver 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Design wash led zoom cw

Table of Contents