Menu Lock; Split Mode - Monacor HDVR-184 User Manual

5.3 Menu Lock

Considering a system safety feature you can click [
DVR. If you want to login to the DVR again, you would input device code and password to unlock the interface
shown as Picture 5-59
Picture 5-59

5.4 Split mode

The model displays 4/8 live images in the sequence of single, 4-split and 9-split modes.
If you enter into 4-split mode, the live images will be displayed in turn CH1~4, CH5~8...and CH13~16.
If you enter into 9-split mode, the live images will be displayed in turn CH1~9 CH10~16.
5.5PTZControl
Click the [
camera with Pan, Tilt and Zoom capabilities.
Click [Zoom-/+] button to zoom in / out the image; Click [Focus -/+] button to focus the image; Click [Iris -/+]
button adjust iris to open or close.
How to set pre-set point
Total: set up pre-set point quantity
Cur Point: indicates starting point cruised. System default point is 01. The model support up to 255
pre-set points.
Stop time: sets the stop time at each point and range is 1~255;
GOTO: allow you go to a specific preset point.
Set: allow you set a set of specific preset points of a PTZ camera.
1. Select a camera you desire to set a preset point;
2. Adjust the camera in a desired direction;
3. Click [Set] to set the point as preset point;
4. Click [Save] to save the preset point;
5. Follow the above step to add one more preset point.
Save: save all the preset points
Clean: allow you delete one selected preset point.
Note: Up to 254pre-sets per one camera can be stored. However, actual preset quantity differs depending
on PTZ performance.
Picture 5-60
] icon to enter into [PTZ control] menu shown as Picture5-60. Now user can control the
] icon to lock system interface when leaving the
Friendly Reminder: Administrator has full authority
over Main Menu operations and has an authority to
limit common user's operation.
33
User Manual