Network Parameters - Monacor HDVR-184 User Manual

6.3.3.2 Record
Click <Record> option to unfold its sub-options: Record parameter, Schedule and Main stream.
Picture 6-15
Picture 6-17

6.3.3.3 Network Parameters

Unfold <Network> option to enter into its sub-options: Network, sub stream, Email, mobile and DDNS
configuration.
1 Network
Picture 6-18
Picture 6-19
Picture 6-16
1、 Record Parameters: Under [Record parameters]
option, allow you set channel, record enable, pack time
and Pre-record status shown as Picture 6-15;
2、 Schedule: Detailed parameters please refer to DVR
local setting (shown as Picture 6-16).
Green stand for Normal record; Yellow stands for
Motion detection; Red stands for I/O triggered record.
3、 Main Stream: detailed settings please refer to DVR
local setting (shown as Picture 6-16). Herein allow user
modifies the resolution, frame rate, Bit rate and audio
of the record channel.
1、 The model support three network type, including Static,
DHCP and PPPoE. System default <Static> as its
network type. User could allocate IP and perform Port
forwarding for DVR according to different router. When
set <UPNP> to "On", user no needs to perform port
forwarding. Once you modify the network parameters
successfully, DVR will automatically restart.DVR
For details parameters please refer to below Picture 6-18,
Picture 6-19 and Picture 6-20.
Picture 6-20
41
User Manual