Advanced - Monacor HDVR-184 User Manual

5.2.7.3 Information
Click [Main Menu System Info] and then enter into the interface shown as Picture 5-55.
Picture 5-55

5.2.8 Advanced

5.2.8.1 Maintain
Click [Main menu Advanced Maintain] to enter into the maintain interface shown as Picture 5-56.
Picture 5-56
Load Default: If [Load Default] is selected, you can initialize the system to the ex-factory default.
Reboot: Click [Reboot] button to manually restart DVR system.
Shutdown: Click the [Shutdown] button to shutdown the device.
Load Setting: Load the parameters in the U flash disk to device; after loading successfully, system will
auto restart.
Save Setting: Save the parameters of device to a flash disk.
Note:
1. Do not take out the USB memory or break the power during the update;
2. When the update is done, system will be automatically restarted;
3. Please manually recovery ex-factory default after system rebooting;
4. It will be available only when DVR return back to Preview mode and no any operation.
5.2.8.2 Event
Click [Main menu Advanced Event] to enter into the <Event> interface shown as Picture 5-58.
Picture 5-58
Now user can check the current Device name,
Device ID, Device type, Device S/N, MAC
address, IE version, Software version, Panel
version etc.
Auto Reboot: You can enable the auto
maintain function regularly as per user's need.
System Upgrade:
After decompressing update file package, copy
the file named "dvrupgrade" to root directory of
U flash disk;
Insert the U flash disk into USB port of DVR;
Click <Upgrade>.
Event Type: support the three abnormal types:
Disk No Space, Disk Error and Video Loss.
Enable: allow you activate abnormal alarm.
Alarm out: select [Enable] or [Disable]
Latch time: you can set how long the buzzer will
sound when external sensor alarm is detected
(10s, 20, 40s, 60s);
Show Message: You can set show message on the
screen when sensor alarm is detected.
32
User Manual