General Care & Cleaning - Kenmore 790.7752 Use & Care Manual

General Care & Cleaning
• Cleaning Cooktop, Burner Caps, Burner Heads & Grates
Cleaning the Cooktop, Burner Heads, Caps & Grates
The cooktop is designed to make cleaning easier. Because the gas Burners are sealed, cleanups are easy when spillovers
are cleaned up immediately.
The cooktop, Burner Heads and Caps should be routinely cleaned. Keeping the Burner Head Ports clean will prevent
improper ignition and an uneven flame. Refer to the following instructions:
THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.
Use caution when replacing the Burner Caps so the Electrodes are not damaged. This may cause a
delayed ignition or prevent the burner from igniting.
Do not remove any parts from the cooktop until they have completely cooled and are safe to handle. Do
not operate the surface burners without the burner caps.
important: Do not allow food, spills, cleaning agents or other material to enter the gas burners.
To Remove and Replace the Surface Burner Caps and Burner Heads =
Remove in the following order: (1 st) surface Burner Grates, (2nd) Burner Caps and
(3rd) Burner Heads. Reverse the procedure above to replace the surface Burner
Caps, Burner Heads and Burner Grates.
Do not remove any parts from the cooktop until they have completely
cooled and are safe to handle. Do not operate the surface Burners without
the Burner Caps and Burner Heads properly in place.
To Clean the surface Burner Caps and Burner Heads =Use a soap-filled
scouring pad or a mild abrasive cleanser to clean the surface Burner Caps and
Burner Heads. The ports (or slots) around the Burner Heads must be routinely
cleaned. If residue still remains in these ports, use a small-gauge wire or needle
to clean the slots or holes. For proper flow of gas and ignition of the burner--DO
NOTALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER
MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING.ALWAYS keep
the surface Burner Caps and Burner Heads in place whenever the gas Burners
are in use.
To Clean the Burner Grates (all models) =The Burner Grates are dishwasher
safe and may be cleaned in the dishwasher. Remove any excessive soils before
placing in the dishwasher.
To Clean the Cooktop and contoured areas of the Cooktop
If a spill occurs on or in the recessed or contoured areas, blot up spill with an
absorbent cloth. Rinse with a clean, damp cloth and wipe dry. Do not use harsh
abrasive cleaners on the cooktop. They can scratch the pocelain. Completely
rinse any mild cleaners used from the surface or the porcelain cooktop may
become damaged during future heating. DO NOT use spray oven cleaners on the
cooktop.
iii ............
39