Table of Contents
Advertisement
Run mode features
11.5 Playback controls
When you are in cue (run mode), Xciter shows playback controls on LCD2. Playback controls involve the
following:
•
SMF 1-6
•
SMB 1-6
•
SCR2
•
LCD2
XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX
XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX
The first things that jump to the eye are the labels. These are actually the PB scene names. Although you
can give a name of 15 characters, they are chopped off at 10 characters when they are displayed above
the faders. So we recommend you give significant names of 10 characters to PB scenes.
11.5.1 Activate and bounce override playbacks
1. Use SCR2 to scroll through the playback banks.
2. Push SMF (above 3%) to activate the PB and adjust its influence on the output. The higher you push it, the
higher the influence of the PB scene.
The LED in the corresponding SMB lights up to indicate the playback is active and locked.
3. Hit SMB to bounce override playbacks.
11.5.2 Deactivate override playbacks
1. Use SCR2 to scroll through the playback banks.
2. Pull SMF (under 3%) to deactivate the PB.
The LED in the corresponding SMB goes out.
11.5.3 Auto lock
The moment you activate a PB, it is locked automatically on its current position. Locked means the PB will
no longer scroll along with the ones that are inactive.
The moment you deactivate the PB, it is unlocked again.
11.5.4 Hard lock
In some cases, you want a PB that never scrolls, a so-called hard locked PB.
Hold [SHIFT], press SMB of the PB you wish to lock and release [SHIFT].
Do the same if you wish to unlock it again.
11.6 Basic cue list dialog
When you press [CL], Xciter enters cue list mode and shows the basic cue list dialog.
54
Martin Xciter user manual
Advertisement
Table of Contents
