Chapter 3. Basics; Power On; Power Off; Setup Menu - Martin Xciter User Manual

Chapter 3. Basics

3.1 Power on

1. Make sure the Xciter has power.
2. Press [ON].
The intro screens will appear on LCD1 and LCD2.

3.2 Power off

The Xciter's power off is safeguarded by a 2 second delay. Meaning you have to hold the ON button for at
least 2 seconds.
Hold [ON] 2 seconds to power off.

3.3 Setup menu

The setup menu is only accessible from the start-up screen. If the Xciter is in not in programmer mode, it
will ask for the password to go to programmer mode. You have to provide this password to enter the setup
menu.
Hold [ESC] for 2 seconds to go to the setup menu.
Libr ar y User Mode
P at ch Envir onm ent
Aut or un
Int er f aces
Martin Xciter user manual
Basics
13