Engine Installation - Sym Fiddle 50 Service Manual

Remove engine mounting nut and bolt.

Engine installation

Install in the reverse order of removal procedures.
Tighten the engine mounting and rear shock
absorber upper/lower bolts.
Torque value:
Engine hanger bolt:
Rear shock absorber upper
mounting bolts:
Rear shock absorber lower
mounting bolts:
Exhaust pipe connection nut:
Muffle mounting bolt:
Perform the following inspection and adjustment
after installation.
Check if control cable is correct.
Check if throttle valve cable is correct.
Check if oil pump control cable is correct.
Oil input and output of the oil pump.
Adjust rear brake.
This chapter Contents
5.0kgf-m
4.0kgf-m
2.7kgf-m
1.2kgf-m
3.3kgf-m
4. ENGINE REMOVAL
Engine mounting bolt
4-5