ProForm Crosswalk 2.0 XT User Manual page 13

13. Attach the Left Crosswalk Arm (117) and a
Plastic Spacer (119) to the Left Upright (53) with
two 1/4" x 3" Bolts (111) and two 1/4" Flat
Washers (114). Make sure that the Left
Crosswalk Arm is on the indicated side of the
console assembly.
Attach the Right Crosswalk Arm (not shown)
in the same way. Be careful not to pinch the
wires in the Right Upright (not shown).
14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-
mill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex
keys is used to adjust the walking belt (see page 23).
13
117
Console
Assembly
114
111
13
53
119