ProForm Crosswalk 2.0 XT User Manual page 12

11. With the help of a second person, carefully lower
the Uprights (54, not shown) to the floor.
Attach the ground wire on the Wire Harness (39)
to the indicated hole in the Base (52) with an M4
x 10mm Ground Screw (84).
12. See the lower drawing. Position the Uprights
(53, 54) so that the Frame (51) is centered be-
tween them.
Firmly tighten the two M10 x 60mm Patch Bolts
(1) and the four M10 x 75mm Bolts (2) (only one
side is shown). Be careful not to overtighten
the M10 x 60mm Patch Bolts. Raise the
Uprights (53, 54).
11
52
Hole
Ground Wire
12
54
12
54
84
39
1
53, 54
Top View
51
2
53