Toshiba GA-1211 Easy Setup Manual page 50

2 INSTALLING THE PRINTER DRIVER (Windows)
3
Select the [Accessories] tab, select the option under [Available
Options] box, and click [Add].
Added options are displayed in the [Installed Options] box. Repeat the operation to add
all options installed on the equipment.
GA-1211 or GA-1211-EX
2 hole Punch — Select this option when the 2 Hole Punch Unit is installed.
2/3 hole Punch — Select this option when the 2/3 Hole Punch Unit is installed.
4 hole Punch Type E — Select this option when the 4 Hole Punch Unit (Type E) is
installed.
4 hole Punch Type NE — Select this option when the 4 Hole Punch Unit (Type NE)
is installed.
Auto Trapping — Select this option when the Auto Trapping option is installed.
(Available only for the PS printer driver.)
Drawer 3 Only — Select this option when Drawer 3 is installed.
Drawer 3-4 — Select this option when Drawers 3 and 4 are installed.
Finisher — Select this option when the Finisher is installed.
Finisher + Hole Punch — Select this option when the Finisher and Hole Punch Unit
are installed.
Hanging Finisher — Select this option when the Hanging Finisher is installed.
Large Capacity Feeder — Select this option when the Large Capacity Feeder is
installed.
Saddle Stitch Finisher — Select this option when the Saddle Stitch Finisher is
installed.
Saddle Stitch Finisher + Hole Punch — Select this option when the Saddle Stitch
Finisher and Hole Punch Unit are installed.
Spot-On — Select this option when the Spot-On option is installed. (Available only for
the PS printer driver.)
48 Configuring the Option