Toshiba GA-1211 Easy Setup Manual page 5

Other Points
Do not take off the cover of the equipment; otherwise you could be injured or get an electric
shock.
Make sure that there is enough space around the system to facilitate changing of parts,
maintenance and clearing paper jam.
If there is insufficient space, some operations, such as bypass feeding, will become difficult
and the Multifunctional Digital Color Systems could even break down.
To insure optimal operation, allow clearances of at least 31.5" / 80 cm on the right, and 3.9" /
10 cm on the left and behind.
10 cm
3.9"
Rear
Equipment
Left Right
10 cm 80 cm
Front
3.9" 31.5"
The socket outlet shall be installed near the equipment and be easily accessible.
Be sure to fix and plug in the power cable securely after the installation so that no one trips
over it.
Pull out the plug from the outlet more than once a year to clean around the prongs.
Accumulating dust and dirt could cause a fire due to the heat released by electric leakage.
Notice 3