Toshiba GA-1211 Easy Setup Manual page 30

2 INSTALLING THE PRINTER DRIVER (Windows)
7
Select [LPR] in the [Protocol] option, enter a queue name into the
[Queue Name] box in the [LPR Settings] option, and click [OK].
Select one of the followings that you want to use for the [Queue Name] box depend-
ing on how you want to print.
- print - print jobs are spooled to the hard disk in the printer and printed out. Use
- direct - print jobs are sent straight to the printer without spooling.
- hold - print jobs are held until users operate copying or moving them to the Print
You can also enable the LPR Byte Counting by selecting the [LPR Byte Counting
Enabled] check box.
28 Installing the Printer Driver
this queue for general printing.
You cannot change the order of print jobs by moving them, which are sent to this
queue.
queue with the job management tools.