Table of Contents
Advertisement
User Manual of DS-DVR04, DS-DVR08, DS-DVR16 Series DVR
5.8 Configuring HDD Group for Record
Purpose:
You can group the HDDs and save the record files in certain HDD group.
Steps:
1.
Enter
HDD
interface. Menu>HDD
2.
Select Advanced on the left bar.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,
please refer to Chapter 10.4 Managing HDD Group.
3.
Select General in the left bar.
Click
to enter editing interface.
4.
Configuring HDD group.
1) Choose a group number for the HDD group.
2) Click Apply and then in the pop-up message box, click Yes to save your settings.
3) Click OK to back to the upper level menu.
Repeat the above steps3-4 to configure more HDD groups.
5.
Choose the Channels which you want to save the record files in the HDD group.
1) Select Advanced on the left bar.
2) Choose Group number in the dropdown list of Record on HDD Group.
3) Check the channels you want to save in this group.
4) Click Apply to save settings.
Note:
After having configured the HDD groups, you can configure the Recording settings
following the procedure provided in Chapter 5.2-5.6.
setting
Figure 5.33 HDD-General
Figure 5.34 HDD-Advanced
70
Advertisement
Table of Contents
