Table of Contents
Advertisement
User Manual of DS-DVR04, DS-DVR08, DS-
DVR16 Series DVR
3.
Enter Alarm Host IP and Alarm Host Port in the text fields.
The Alarm Host IP refers to the IP address of the remote PC on which the CMS (Client
Management System) software (e.g., NVMS7000) is installed, and the Alarm Host Port must be the
same as the alarm monitoring port configured in the software (default port is DS-DVR04, DS-
DVR08, DS-DVR16).
4.
Click the Apply button to save and exit the interface.
9.2.7 Configuring Multicast
Purpose:
The multicast can be configured to realize live view for more than the maximum number of cameras through
network.
A multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use the
IP address ranging from 239.252.0.0 to 239.255.255.255.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the More Settings tab to enter the More Settings interface.
3.
Set Multicast IP. When adding a device to the CMS (Client Management System) software, the
multicast address must be the same as the device‟s multicast IP.
4.
Click the Apply button to save and exit the interface.
Figure 9.24 More Settings Interface
Figure 9.25 Configure Alarm Host
Figure 9.26 Configure Multicast
Advertisement
Table of Contents
