Table of Contents
Advertisement
User Manual of DS-DVR04, DS-DVR08, DS-
DVR16 Series DVR
10.4 Configuring Quota Mode
Purpose
Each camera can be configured with allocated quota for the storage of recorded files.
Steps
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Quota.
Note:
The device must be rebooted to enable the changes to take effect.
3.
Enter the storage capacity in the text field of Max. Record Capacity (GB).
8.
You can copy the quota settings of the current camera to other cameras if required. Click the Copy
button to enter the Copy Camera menu, as shown below.
5.
Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of
Figure 10.14 Storage Mode Settings Interface
Figure 10.15 Configure Record Quota
Figure 10.16 Copy Settings to Other Camera(s)
146
Advertisement
Table of Contents
