Configuring General Settings - Privacy Electronics DS-DVR04 Series User Manual

User Manual of DS-DVR04, DS-DVR08, DS-
DVR16 Series DVR

9.1 Configuring General Settings

Purpose:
Network settings must be properly configured before you operate device over network.
Steps (for DS-DVR04, DS-DVR08, DS-DVR16FH/WH/SV and 7300):
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the General tab.
Figure 9.1 General Network Settings of DS-DVR04, DS-DVR08, DS-
DVR16FH/WH/HH and DS-DVR04, DS-DVR08, DS-DVR16-HV
Note: The DS-DVR04, DS-DVR08, DS-DVR16FH/WH/HH and DS-DVR04, DS-DVR08, DS-
DVR16-HV models provide one 10M/100Mbps self-adaptive network
interface, and the 7300WH/FH models provide one 10M/100M/1000Mbps self-adaptive network
interface.
3. In the General Settings interface:
You can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and
DNS Server.
If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an IP
address and other network settings from that server.
Note: The valid value range of MTU is 500 ~ 1500.
4. After having configured the general settings, click the Apply button to save the settings.
Steps (for 8100):
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the General tab.
Figure 9.2 General Network Settings of 7300