Table of Contents
Advertisement
User Manual of DS-DVR04, DS-DVR08, DS-
DVR16 Series DVR
5.4 Configuring Alarm Triggered Record
Note:
This section is available for 7300 and 8100 models only.
Purpose:
Follow the procedure to configure alarm triggered recording or capture.
Steps:
1.
Enter the Alarm setting interface.
Menu> Configuration> Alarm
2.
Click Alarm Input tab.
1) Select Alarm Input No. and configure alarm parameters.
2) Choose N.O (normally open) or N.C (normally closed) for alarm type.
3) Check
4) Click
Figure 5.20 Alarm Settings
Figure 5.21 Alarm Settings- Alarm Input
checkbox to enable the alarm input.
to set the handling method.
63
Advertisement
Table of Contents
