Table of Contents
Advertisement
User Manual of DS-DVR04, DS-DVR08, DS-
DVR16 Series DVR
10.5 Checking HDD Status
Purpose:
You may check the status of the installed HDDs on device so as to take immediate check and maintenance in
case of HDD failure.
Checking HDD Status in HDD Information Interface
Steps:
1.
Enter the HDD Information interface.
Menu > HDD>General
2.
Check the status of each HDD which is displayed on the list.
Note:
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or Abnormal,
please initialize the HDD before use. And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Steps:
1.
Enter the System Information interface.
Menu > Maintenance > System Info
2.
Click the HDD tab to view the status of HDD displayed on the list.
Figure 10.17 View HDD Status (1)
Figure 10.18 View HDD Status (2)
148
Advertisement
Table of Contents
