Starting Up And Shutting Down The Device - Privacy Electronics DS-DVR04 Series User Manual

User Manual of DS-DVR04, DS-DVR08, DS-
DVR16 Series DVR

1.6 Starting Up and Shutting Down the Device

Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the device.
Before you start:
Check that the voltage of the extra power supply is the same with the device‟s requirement, and the ground
connection is working properly.
Starting up the device:
Steps:
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device.
2. Press the POWER button on the rear panel. The Power indicator LED should turn green indicating that
the unit begins to start up.
Shutting down the device:
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Click the Shutdown button to enter the following dialog box:
3. Click the Yes button. The following message box pops up:
4. Turn off the power switch on the rear panel of DVR.
Rebooting the device
In the Shutdown menu (Figure 1.11), you can also click Reboot to reboot the device.
Figure 1.20 Shutdown Menu
Figure 1.21 Dialog Box for Shutdown
Figure 1.22 Message Box for Power Off
27