User Manual of DS-DVR04, DS-DVR08, DS-
DVR16 Series DVR
8.2 Setting Sensor Alarms
Note:
This section is available for 7300 and 8100 models only.
Purpose:
You can set handling method of an external sensor alarm.
Steps:
1. Enter Alarm Settings interface and select an alarm input.
Menu> Configuration> Alarm
2. Select Alarm Input tab to enter Alarm Input Settings interface and set the handling method of the
selected alarm input.
Check
checkbox to enable the alarm input and click
Figure 8.6 Copy Settings of Motion Detection
Figure 8.7 Alarm Status Interface
108
to set up its alarm response actions.