Resetting The Control Pad - Velux KLR 200 User Manual

VELUX INTEGRA
®
KLR 200
Setting up

Resetting the control pad

The control pad can be reset to its initial factory settings if you
want to delete all registered products and personal settings and
start afresh.
Note: If you have one control pad only, all products must be reset
before you can register them in the control pad again, see the sec-
tion If the initial set-up fails. If you have an additional control, you
can copy this to the control pad you are resetting instead, see the
section Adding a control.
1
2
2
3
1
Tap to ensure that the
control pad display is on.
Remove the battery lid by
pressing the release button
with a screwdriver as illustrated
(1), (2).
press the REsET button on the
back of the control pad with
a pointed object for at least
5 seconds (3).
3
Reset control pad
You are about to reset the control pad to
inital factory settings. This means that
products and personal settings will be
deleted.
Do you want to continue?
3
Tap "Yes" to confirm that you
want to reset the control pad.
The control pad has now been
reset. To be able to use it again
the products must be registered
again. see the section Initial
set-up.
VELUX 90