Operation Of Lights; Operation Of On/Off Switch Products; Operation Of Other Types Of Io-Homecontrol Products; Product Position - Velux KLR 200 User Manual

VELUX INTEGRA
®
KLR 200
Operation
Basic operation

Operation of lights

Turn off
1
stop
2
Turn on
3
Drag the slider or tap the bar to set the intensity of the light.
4
The position from 0-100 is shown in the bottom right corner.

Operation of on/off switch products

off
1
on
2
Operation of other types of io-homecontrol
open
1
stop
2
close
3
Note: The example shows a garage door.

Product position

Tap "sTop" and, in the bottom right corner of the display, see the
position of the product shown in the product navigator. You can
for instance see how open a window has been left.

Turn on / Home / Stop all products

To prolong the lifetime of the control pad batteries, the display
goes into sleep mode shortly after the last touch. You turn on the
display again by tapping .
When the display is on, a tap on
product in the product navigator.
Touching and holding for at least 3 seconds stops all products.
products
®
takes you home to the first
1 2 3
1 2
3
1 2
2
4
VELUX 8