Table of Contents
Advertisement
PDT 1100 Terminal DLL Guide
Options
+L timeoutlength Sets the timeout length in seconds.
+Ln
+X x-coordinate
Specifies the x-coordinate of the PDT 1100 Sending or PDT 1100
Receiving dialog box.
+Xn
+Y y-coordinate
Specifies the y-coordinate of the PDT 1100 Sending or PDT 1100
Receiving dialog box.
+Yn
Note: If the same option is set more than once with different specifications,
the most recent one has the highest priority.
2-10
Table 2-1. Options (Continued)
Functions
n=0 to 65535
Specification of +L0 produces no timeouts.
Specification of only +L makes the default (30 seconds)
active.
n=-65535 to 65535
This specifies the location of the left side of the dialog box.
The display position is a relative value from the upper left
corner of the screen.
n=-65535 to 65535
This specifies the location of the upper side of the dialog
box. The display position is a relative value from the upper
left corner of the screen.
<Example> +X100 +Y400
The dialog box appears with its upper left corner located
at (100, 400).
Defaults
+L30
Advertisement
Table of Contents
