Table of Contents
Advertisement
PDT 1100 Terminal DLL Guide
To handle CR-LF codes as data, specify the +C option. CR-LF codes in records are
transmitted as data:
Record n1
When downloaded:
Specified Record Length
Record n1
Even if you specify the +C option, use CR-LF codes as a record separator. If a record's length
is more or less than the specified record length in a file, an error (error code 76) occurs and
the transmission is aborted. For the +C option, refer to Options on page 2-7.
To download data files containing CR-LF codes in records to the PDT 1100:
1. At the host computer, specify the +C option in Ir-Transfer Utility C DLL
2. At the PDT 1100, set the [Data] on the space code handling screen in System Mode
(or in PDT 1100-BASIC 3.0, specify the T option to "protocolspec" in the
statement) to regard space codes in the tail of a data field as data.
If [Ignore] is selected (or no T option is specified), the PDT 1100 ignores space codes in the
tail of a data field and data is not transferred correctly.
For [Data] setting, refer to the PDT 1100 Product Reference Guide. For T option setting in
the
statement, refer to the PDT 1100 Programmer's Guide.
XFILE
2-6
Specified Record Length
CR
LF
Record n2
CR
LF
Record n2
CR
LF
= Transmitted in a single block
XFILE
Advertisement
Table of Contents
