Selecting Thumbnails; Setting Thumbnail Screen Display - Panasonic AJ-PX270 Operating Instructions Manual

Memory card camera-recorder
Hide thumbs Also See for AJ-PX270:
Table of Contents

Advertisement

Selecting thumbnails

Multiple thumbnails can be randomly selected on the thumbnail screen.
Selecting clips
You can select multiple clips randomly.
1
Use the control stick to move the cursor over the desired clip.
2
Press the control stick.
A light blue frame and
are displayed on the clip where the cursor is put. This indicates that it is selected.
3
To select additional clips, repeat steps 1 to 2.
It is possible to display only the selected clips on the thumbnail screen for playback.
@
NOTE
t While holding down the <SHIFT> button, press the control stick upward/downward to move the cursor to the first/last clip.
t After selecting a clip, move the cursor to another clip and press the control stick while pressing the <SHIFT> button to select all clips from the
previously selected clip to the one at cursor position.
t As clips are selected, the number of selected clips displayed on the lower right corner of the screen changes according to the selection.
Deselecting clips
1
Move the cursor to the selected clip and press the control stick.
This deselects the clip.
@
NOTE
t While holding down the <SHIFT> button, press the <EXIT> button to deselect all the clips at once.

Setting thumbnail screen display

You can customize the thumbnail screen according to usage.
1
Select [THUMBNAIL SETUP] in the main menu → [CLIP].
The thumbnail setting items ([INDICATOR], [DATA DISPLAY], [THUMBNAIL SIZE], [PB POSITION], [PROPERTY DISP.]) are displayed. For details,
refer to "Setting items that display properties" (page 103).
Setting thumbnails to be displayed
1
Select [REPOSITION] in the main menu → [CLIP].
2
Use the control stick to move the cursor to the size of the thumbnail you want to display.
3
Press the control stick.
Setting the thumbnail size
You can customize the thumbnail size.
1
Select [THUMBNAIL SIZE] in the main menu → [CLIP] → [THUMBNAIL SETUP].
2
Use the control stick to move the cursor to the type of the clip you want to display.
3
Press the control stick.
Chapter 5 Playback — Thumbnail operations
Setting example for thumbnail screen ([INDICATOR])
– 102 –

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents