Panasonic AJ-PX270 Operating Instructions Manual page 130

Item
[FORMAT]
[FORMAT(STORAGE)]
[COPY]
[EXPORT]
[IMPORT]
[REPAIR]
[RE-CONNECT]
[EXCH. THUMBNAIL]
[EXPLORE]
[AUTHENTICATE]
[CHANGE PARTITION NAME]
[DELETE LAST PARTITION]
[DELETE FOLDER]
[PROPERTY] [CLIP PROPERTY]
[CARD STATUS]
[CPS PASSWORD]
[SD CARD]
[REMAIN SETUP]
[FREE CAP. OF
PARTITION]
[THUMBNAIL SETUP] [INDICATOR]
Chapter 6 Menu Operations — Menu list
When the [FORMAT] menu is selected, format the P2 card of the specified slot.
[SLOT 1], [SLOT 2], [SLOT 3], [SD CARD]
f When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or
[CPS(ENCRYPT)] (encrypted format).
f Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
When in USB host mode, formats a storage device connected to the <USB3.0 HOST> terminal using the
specified file system.
[TYPE S]: Formats in the [TYPE S] format.
[FAT]: Formats in the [FAT] format.
This item is enabled only while the storage explorer screen or storage thumbnail screen is displayed.
Copies the selected clip to a P2 card in any card slot or a storage device.
[SLOT 1], [SLOT 2], [SLOT 3], [SD CARD], [STORAGE], [FTP], [FTP(PROXY)]
When in USB host mode, exports (writes) from the P2 card or SD memory card to a storage device or FTP
by units of card.
[ALL SLOT], [SLOT 1], [SLOT 2], [SLOT 3]: Exports from the P2 card to a storage device.
[SD CARD]: Exports from the the SD memory card to FTP.
When in USB host mode, imports (writes back) clips etc. from a storage device or FTP to the P2 card or
SD memory card in units of card.
[SLOT 1], [SLOT 2], [SLOT 3], [SD CARD]
Repairs a clip displayed in the defective clip indicator (yellow) occurring as a result of sudden power loss
during recording or other reasons.
If clips that were recorded over multiple P2 cards are not recognized as consecutive clips and the
incomplete clip indicator is displayed, use this function to restore the clips to the consecutive clips (the
original combined clips).
Changes the clip thumbnail to an image with any text memo. This can be executed while the text memo
clip is displayed.
When in USB host mode, switches to the information display screen for storage device and network
connection.
[STORAGE]: Switches to the information display screen for storage device.
[FTP]: Switches to the information display screen for FTP server.
When this menu is selected from the card status screen, a software keyboard is displayed to enter the
CPS password. If the password is entered and [OK] is selected, the CPS password is set to the camera.
When the set CPS password is successfully authenticated, the message [AUTHENTICATED
SUCCESSFULLY!] is displayed.
When the set CPS password authentication fails, a warning message is displayed.
When in USB host mode, sets/changes the partition name of the storage device.
f The default value is the date and time when the partition was created.
f This item is enabled only for the [TYPE S] storage device.
f This item is displayed only when the storage explore screen is displayed.
When in USB host mode, deletes the last storage partition.
f The partition can be deleted only when the cursor is placed on the last partition.
f This item is displayed only when the storage explore screen is displayed.
Delete folders in the storage device in the FAT format.
Detailed clip information is displayed on the screen. Items can be individually corrected.
Displays the card status of a card slot.
Sets the CPS encrypted password of the microP2 memory card.
[LOAD]: Loads CPS password from an SD memory card.
[SET]: Enters the CPS password.
[DELETE]: Deletes the password saved to the device, and disables encrypted formats.
Displays SD memory card information.
Sets which is displayed, remaining capacity or used capacity, when P2 card information is displayed.
[REMAIN]: Displays remaining capacity.
[USED]: Displays used capacity.
f Factory setting: [REMAIN]
Displays available space in a partition.
Selects an item to display and press the control stick. Checked items are displayed. When [ALL HIDE] is
selected, other items cannot be selected.
[ALL HIDE]: Hides all indicators.
[MARKER]: Displays the shot mark indicator.
[TEXT MEMO]: Displays the text memo indicator.
[WIDE]: Displays the wide indicator.
[PROXY]: Displays the proxy indicator.
f Factory setting: [MARKER], [TEXT MEMO], [WIDE], [PROXY]
– 130 –
Description of settings