Attaching The Front Microphone; Attaching A Tripod; Attaching And Adjusting Accessories - Panasonic AJ-PX270 Operating Instructions Manual

Attaching the front microphone

Microphones such as a super-directional microphone AG-MC200G (optional) can be attached.
Screws for tapped hole protection are attached on the camera body. Remove those screws when you attach the microphone holder.
Screw for the microphone holder
Microphone holder
Fig. 1
1
Attach the microphone holder. (Fig. 1)
2
Attach the microphone and tighten the microphone holder clamping screw. (Fig. 2)
3
Connect the microphone connecting cable to the <AUDIO INPUT 1> terminal on the camera. (Fig. 3)
4
Secure the microphone connecting cable with the microphone cable clamp.
5
Set the <INPUT 1> switch to match the microphone to be connected.
@ NOTE
t The microphone holder cannot be fixed with the screws originally attached on the camera. Use the dedicated screws that came with the camera to fix
the microphone holder.

Attaching a tripod

The tripod attachment holes accept 1/4-20 UNC and 3/8-16 UNC screws. Use the hole that matches the diameter of the clamping screw on the tripod.
@ NOTE
t Use a tripod in safe locations.
t The depth of the tripod attachment hole is 5.5 mm. When attaching the camera to a tripod, do not over-tighten the tripod screw.
Chapter 3 Preparation — Attaching and adjusting accessories
Fig. 2
– 31 –
Microphone cable clamp
<AUDIO INPUT 1> terminal
Fig. 3