Using Your Race Program - Horizon Fitness Core Series Owner's Manual

U S I N G Y O U R R A C E P R O G R A M
Your Race Program is designed to add motivation to a workout by allowing you to compete against a
selected pacer. To use your Race Program, follow these instructions:
1. Choose the Race program by either pressing the ĎUpíor ĎDo w ní buttons or by pressing quick resist-
ance key number 14. Press ĎEnterí.
2. Choose the desired Pace (average speed) using the ĎUpíor ĎDo w ní buttons. There are a total of
17 Pace levels to choose from, ranging from 6 mph to 22 mph in increments of 1.0 mph, with 6.0 mph
being the lowest and 22 mph being the highest. Once the desired Pace is selected, press ĎEnterí.
3. Choose the desired Distance by pressing the ĎUpíor ĎDo w ní buttons. Press ĎEnterí.
4. Choose your weight by pressing the ĎUpíor ĎDo w ní buttons. Press ĎEnterí.
5. Press ĎStar t í and begin your Race Program.
The time of the program will default accordingly to the pace (average speed) and distance that you
entered. After the Race Program has started, press the ĎUpíor ĎDo w ní buttons or the quick resistance
keys to adjust your resistance (levels 1-20). Your goal in this program is to beat the pacer to the fin-
ish line by covering an equal distance at a faster pace.
The top row of bars shows the computer pacer position. The bottom row of bars indicates your posi-
tion. If you trail the pacer, you should pedal at a faster speed to catch and pass the pacer.
If you beat the pacer to the finish line, the screen will flash ďTime Ov er and the program will end.
Note: If you beat the pacer to the finish line, you will complete the program before the projected fin-
ish time. If the pacer beats you to the finish line, the entire program time will elapse.
21
Core Series