System Setup - Inter-m DSR-815 Operation Manual

DIGITAL VIDEO RECORDER

2. System Setup

The system configuration is the menu that sets up an operating method by conforming with an installation
place when running your DVR system.
You should refer the following.
The setting menu consists of 6 ones.
A set value will be saved when you select
menu.
Upon factory delivery, the setting value is to save 16 cameras at all times. And your camera use,
recording method, and schedule should be set up according to your field situations.
After finishing to change the configuration, change the changed value by clicking on the 1111button.
When you click on the button, it will terminate a current environment setting window.
When terminating to set up a menu, the screen may flicker.
Manipulations of the remote control attached to the product conform with those of the front key.
(It was designed to set up and control more easily by supporting the mouse.)
If you run DSR-1608/DSR-815 with the same method, camera input channel (16/8 channels)
and sensor input (16/8 channels) will be different in the designed values.
(This manual was made on the basis of DSR-1608.)
The mouse key is defined as follows.
- When you click on the right button of the mouse in the live screen, the menu is appeared.
- When you click on the right button in menu sate, the menu terminates.
- When you click on the left button of the mouse, it selects the corresponding menu then.
- After selecting a menu in the menu item, you change a menu value by utilizing the Wheel button.
The menu setting button key by utilizing the front key and the remote control is defined as follows.
- Set up a menu: Select "MENU" key
- Displace the menu:
- Change a menu value:
- Select Menu: Select "MENU" key.
- Cancel Menu: Select "RETURN" key.
The front Key and the remote control Key run as the same method.
Authentication stage (confirmation of password) : To change set values of the system, it must proceed the stage.
- Select a place with the right button of the mouse, input your password with the mouse wheel (Up /Down)
and then select the OK button.
- Upon delivery of the product, it was set up to proceed the authentication stage before utilizing. The
principal password is "1234".
- In the password setting of the system configuration, you can change whether the authentication stage will
be utilized.
20
DSR-815/1608
the1111
or "Short" key.
or "Jog" key.
(The Default password is "1234")
"Save" button after having finished to set up a