Table of Contents
Advertisement
DIGITAL VIDEO RECORDER
(Select a recording method, and set it up by dragging mouse on time table.)
(1) Channel : Select a camera you desire to set up.
(2) "Apply All" : Select it when you set up the setting values of currently selected channel for all channels.
(It is utilized to set up current setting value for all the channels such as channel 1~channel 16.
(3) Continually : It playbacks continually on corresponding day of the week and time.
(4) Motion : It playbacks on corresponding day of the week and time when it monitors a motion.
(When a motion is not monitored, the recording does not go on.)
(5) Sensor : It playbacks on corresponding day of the week and time when the sensor detects.
(When the sensor does not detect, the recording does not go on.)
(6) Motion + Sensor(event) : It playbacks on corresponding day of the week and time when it monitors
a motion or the sensor detects.
(7) "NONRecord" : It does not playback on corresponding day of the week and time.
6) Resolution : It sets up a resolution of Record.
( [NTSC] ; CIF : 352 X 240, D1 : 704 X 480 )
( [ PAL] : CIF : 352 X 288; D1 : 704 X 576 )
The resolution in <Fig.5> is commonly applied on a camera.
[use of the front key and the remote control]
1) Using the lateral (
[T1].
2) In [T2] tap, sep up the channel you desire to set up. [Using the vertical (
3) In [T4]~[T11] taps, using the vertical (
4) At the position of selected time table, by selecting "ENTER" Key repeatedly, change schedule modes.
5) After finishing the setting, select "ENTER" Key at the position of [T1] to save changed values.
* You can select the whole area of time table while displacing "(T)" position at [T4] tap.
* You can change the values with the vertical (
* Select a current item with "ENTER" Key at the tap currently placed.
2-3. Event & Motion Setup : It sets up motion/sensor/alarm(relay), etc.
On the configuration screen as shown in <Fig. 1>, click on
[use of the front key and the remote control : Select "Menu" button, displace to corresponding menu with
the lateral (
) button, and then select "Enter" button.]
26
DSR-815/1608
) Key, displace a tap item in the order of [T1]
) Key, displace a time position on the time table.
) Key at the tap currently placed.
<Figure. 7>
[T2]
.....
[T10]
[T11]
) Key]
"Event&Action".
Advertisement
Table of Contents
