DIGITAL VIDEO RECORDER
UCM
UCM
1. Default Screen and Using the Functions
- UCM program is program allowing remote monitoring and remote control through networks.
- UCM program was designed to administrate DVRs in integral, whose functions not supported to other DVR
are restricted for some performances.
- Some functions of UCM program may be under change according to InterM's situation.
Function button may not be naturally executed at low line speed depending on the line speed of [UCM
Default Screen] network. Wait a minute until function will be executed.
Problem may occur that the screen stops or remains in a standby status for a long time when consecutively
using function button.
1. Monitoring Screen : Shows the camera image and camera connection information.
[ Camera Information ]
- Camera Name : Displays the configured camera name
- Recording & Event : [R]Do Record, [S]Sensor, [M]Motion
40
DSR-815/1608
<UCM Default Screen>