Sim Holder Removal And Replacement - Motorola C330 Service Manual

Level 3 Service Manual

SIM Holder Removal and Replacement

6881040B65
1. Remove the rear housing cover and SIM as described in the procedures.
2. Turn the endo housing over so the antenna and SIM holder are facing up.
3. Gently press down on the SIM holder.
The SIM holder should easily snap out of the endo housing.
ENDO HOUSING
ENDO HOUSING
Figure 8. SIM Holder Removal and Replacement
4. To replace, turn the endo housing over so that the interior of the housing is
facing up.
5. Insert the SIM holder into the endo housing with the circuit board contacts
facing up and the SIM contacts facing down.
6. Gently press the SIM holder until it snaps into position in the endo housing.
7. Replace the SIM and rear housing cover as described in the procedures.
August 20, 2002
SIM HOLDER
SIM HOLDER
Disassembly
DISASSEMBLY
TOOL
A
B
020554
25