Kenmore Elite Ultra Wash 665.1404 Series Use And Care Manual page 17

I Eco
I Cycle that provides the maximum water and energy saving All soil levels 110 150 4.0
_ ossible to give you optimum cleaning by extending the cycle (15.0)
tlme
_Adding options will add time to the cycle. See options information section.
_This is the approximate cycle time obtained with 120°F (49°C) hot water available at the dishwasher. Increase in time results
from low temperature of the incoming water,
Options
TURBOZONE
TM
option
(on some models)
Blasts into every corner to eliminate
the need for soaking and scrubbing of
dirty, baked-on dishes. For your
toughest items, use the
TURBOZONE
TM
option with the Pots Pans cycle. See
loading information.
High Temp
Raises the main wash temperature to
improve cleaning. When used with
the Normal Wash cycle this will
provide a little extra tough cleaning
capability, but not as much as the Pots
Pans cycle.
Can be selected
with
SmartWash ®xE
Pots & Pans
Normal Wash
SmartWash ®xE
Pots & Pans
Normal Wash
What it does
Directs allof the
cleaning power of the
dishwasher to the
TURBOZONE
TM
area
during certain times in
the wash cycle.
Raises the main wash
temperature from 105°F
(41°C) to 120°F (49°C).
Added time to cycle
Typical
3O
Max
5O
4O 22
Added
Water t
Gallons
(Liters)
0 - 3.0
11.2)
0 - 3.0
11.2)
Sani Rinse
This high temperature option sanitizes
your dishes and glassware in
accordance with National Sanitation
Foundation (NSF)/ANSI Standard 184
for Residential Dishwashers. Certified
residential dishwashers are not
intended for licensed food
establishments. The Sani indicator
indicates at the end of the cycle
whether the Sani Rinse option was
successfully completed. If the
indicator does not activate, it is
probably due to the cycle being
interrupted.
Smart Dry
Turns the heat element on with fan
assist on at the end of the wash cycle.
Use rinse aid with or without the
Smart Dry option for best drying
results. Plastic items are less likely to
deform when loaded in the top dish
rack.
SmartWash ®xE
Pots & Pans
Normal Wash
Available with
any cycle
except
Quick Rinse
Increases the main wash
temperature from 105°F
(41°C) to 120°F (49°C)
and the final rinse from
140°F (60°C) to 155°F
(68°C).
Turns the heat element
on with fan assist on at
the end of the wash
cycle.
53 73
44 51
tThe maximum additional water used for any combination of options is 2.1 gal. (7.9 L).
0 - 3.0
11.2)
0
17