Unitron uDirect 2 Manual page 19

Program change
Use the access ( ) button to change
hearing aid listening programs.
Changing hearing aid programs is
only possible if no streaming is in progress.
Push the home ( ) button to
return to the startup hearing aid
program and volume levels of your hearing aids.
More remote control information:
Your hearing aids may beep to confirm that
your selection was applied.
Both hearing aids are controlled at the same
time.
Please ask your hearing healthcare
professional to print your personal uDirect 2
report.
The available hearing aid programs and
volume levels are set by your hearing
healthcare professional.
30
The power indicator is lit as long as you press
a uDirect 2 button. Green confirms a good
uDirect 2 battery state, red indicates that you
need to charge the uDirect 2 battery.
2 minutes after unplugging the neckloop both
indicator lights will switch off and the uDirect 2
disconnects Bluetooth to save power.
Operating distance
If uDirect 2 is used as a handheld remote control
(without neckloop):
Maximum distance 80 cm/32''
Hold uDirect 2 as shown
31