Okina HD21T-K10 Operational Manual

WARRANTY
OKINA USA products are covered under warranty for three (3) year from the date of purchase. The warranty
will automatically be voided if any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information regarding when and
where the product was purchased. We have no other way to verify the purchase record without the
serial number on the camera sticker; therefore, it should not be removed.
2. Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty
will be voided immediately. It is the customer's responsibility to keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or modifying of the cables
will result in termination of the warranty.
CAUTION
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the pick‐up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.
3. Requires a proper operating environment
This camera is designed for outdoor or indoor use. The allowable temperature range for operation of this
camera is between ‐4F ~ 144F / ‐20C ~ 60C and the allowable humidity is 80%RH maximum or less.
4. Clean the front face to the pick‐up device
It is recommended that the pick‐up device surface be cleaned before lens installation or whenever the
lens is changed. Cleaning should be done by using a chamois, a very fine soft cloth, lens tissue, or cotton
tipped applicator and ethanol to carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet the specifications).
Camera must be connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of short out
parts that could result in a fire or electric shock. Never spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all service to qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the
following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been dropped or the cabinet has been damaged.
d. When the video product exhibits a distinct change in performance.
HD21T-K10
HD21T-K4
Operational Manual
HD SDI 1080P Optical Zoom & Auto Focus
Auto ZF Camera ̶
Auto ZF Lens ̶
Please read the Operational Manual
before attempting to use this product.
FEATURES

SDI 1080p ‐ 1920 x 1080

1/3" Panasonic CMOS

HD21T‐K10: Auto IRIS Twin Stepping Motorized Lens ‐ 10X Zoom ‐ 5~50mm

HD21T‐K 4: Auto IRIS Twin Stepping Motorized Lens ‐ 4X Zoom ‐ 2.8~12mm

0.03 Lux @ F1.4

Mechanical IR Cut Filter – ICR

OSD, and RS485

12V DC ‐ 550mA
Due to the Twin Motorized AF Lens, we recommend to use 12V DC 1A / 1000mA
for each camera.
HDC‐1_HDC‐2
R062013‐V28
PCT/KR2011/007613 & 7656 & 8080
Box Camera
Made in Korea
Made in Korea
4x/10x Various Auto DC IRIS Twin stepping Motorized
Varifocal Lens with Dual Filter change mechanism F1.4
International Patent Registered:
HDC‐1_HDC‐2
R062013‐V28