HOW TO OPERATE THE REFRIGERATOR
Switching on the appliance
Starting up the appliance
Plug in the appliance. When the appliance is connected to the
mains, the inside light switches on each time the door is
opened (provided that the thermostat is set to z ).
The thermostat is used to adjust the temperature of both the
refrigerator compartment and low temperature compartment
Adjusting the temperature
1.For correct operation and optimum storage of food, follow
instructions given in the enclosed product sheet for
2.To adjust the temperature in the compartment, turn the
thermostat control knob:
lowest numbers 1-2/MIN for the LEAST COLD internal
numbers 3-4/MED for a MEDIUM internal temperature;
highest numbers 5-7/MAX for the COLDEST internal
Thermostat set to z : no operation, no light.
The ambient air temperature, frequency of door opening and
the position of the appliance can affect internal temperatures.
These factors must be taken into account when setting the
How to use the refrigerator compartment
Position the food as shown in the figure.
A. Cooked food
B. Fish, meat
C. Fruit and vegetables
The space between the shelves and the rear wall of the
refrigerator compartment must be unobstructed to allow
circulation of air.
Do not place food in direct contact with the rear wall of the
Do not place hot food in the refrigerator.
Store liquids in closed containers.
Storing vegetables with high water content can cause
condensation to form on the glass shelf of the crisper
drawer: this will not affect the correct operation of the