Interconnecting The Hubs Through Stp Ports; Connection Through The Bnc Port - Planet Palm-Top EH-501 User Manual

2.Insert the other end of the STP/UTP cable to the STPport of a
file server or workstation.

Interconnecting the Hubs through STP Ports

1.Insert one end of the straight cable into the any port of the first
Hub.
2.Insert the other end of the straight cable into one of the
"Uplink" ports of the second hub.
3.Repeat Steps 1 and 2 to interconnect the other Hubs.
Figure 3-2Interconnecting the Hub through straight cable
3) The limitation in cascading is no more than 5 hubs can be
daisy- chained.

Connection through the BNC Port

For EH-801, users can also connect the network devices
through the BNC port, please refer to the following for
the install steps.
9