Selecting The Cinema Mode; Using The Aspect Feature - Toshiba 42HP86 Owner's Manual

Selecting the cinema mode

When you view a DVD movie (3:2 pulldown processed) from a DVD
player connected to the ColorStream (component video) inputs on the
TV, smoother and more natural motion can be obtained by setting the
CINEMA MODE to FILM.
To set the CINEMA MODE to FILM:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight CINEMA MODE.
SETUP
CLOSED CAPTION OFF
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE FILM
SELECT
4. Press or to highlight FILM.
5. Press EXIT to return to normal viewing.
To set the CINEMA MODE to VIDEO (off):
Highlight VIDEO in step 4, above.

Using the ASPECT feature

When the ASPECT feature is set to ON and the TV receives a
480i signal, the picture size is automatically selected (as described in
the following table).
Aspect ratio of signal source
4:3 Normal
16:9 Full
4:3 Letter box
Not defined
If the signal does not include aspect information, the picture size you
selected on page 32 is displayed.
To turn on the ASPECT feature:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight ASPECT.
SETUP
ASPECT ON
REVERSE
WHITE
PICTURE SHIFT ON
SIDE PANEL COLOR GRAY
SELECT
4. Press or to highlight ON.
5. Press EXIT to return to normal viewing.
30A0121A_En_p31-40 35
or until the SETUP menu appears.
/ VIDEO
ADJUST
Automatic aspect size
(automatically selected
when ASPECT is ON)
Natural
Full
TheaterWide
User-set mode
or until the SETUP menu appears.
/ OFF
ADJUST
INPUT DISPLAY
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
35
5/26/06, 6:26 PM
TV
Menu/Enter
Exit