Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 42HP86 Owner's Manual

Table of Contents

Advertisement

Adding channels to the TV's memory

When you press CH
you have programmed into the TV's channel memory. Follow the steps
below to program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ until the TV/CABLE
selection is highlighted.
4. Press
or
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
5. Press ▼ until the CH PROGRAM selection is highlighted.
6. Press
or
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW PLEASE WAIT" appears.
7. When channel programming is complete, the message "COMPLETED"
appears.
8. Press CH
or

Adding and erasing channels manually

After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Press TV to select the TV mode.
2. Select the channel you want to add or erase.
If you are adding a channel, you must select the channel using the
Channel Number buttons.
3. Press MENU, then press
4. Press ▲ or ▼ to highlight ADD/
ERASE.
5. Press
or
or ERASE.
6. Repeat steps 2-5 for other chan-
nels you want to add or erase.
7. Press EXIT to return to the normal
screen.

Changing channels

To change to the next programmed channel:
Press Channel ▲ / ▼ on the TV or CH
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9, 100) on the remote control.
For example, to select channel 125, press 100, 2, 5.
30A0121A_En_p18-25
24
or
, your TV will stop only on the channels
or
to display the SETUP menu.
SETUP
to highlight either
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
SELECT
to start channel programming. The TV will automati-
to view the programmed channels.
or
to display the SETUP menu.
SETUP
to select either ADD
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
SELECT
on the remote control.
/
INPUT DISPLAY
ENGLISH
12:00AM
TV /
CABLE
ADD
ADJUST
In addition to cycling through your pro-
grammed channels, the Channel
buttons will also cycle through the video
ENGLISH
input sources (page 30) in the order
12:00AM
CABLE
illustrated below.
ADD
/ ERASE
ANT (programmed channel)
ADJUST
PC
HDMI2
HDMI1
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
24
5/26/06, 6:25 PM
Channel
Numbers
TV
/
Channel
Menu/Enter
Exit
or
VIDEO1
VIDEO2
VIDEO3
ColorStream HD2
ColorStream HD1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

50hp86

Table of Contents