Selecting The Cinema Mode (480I Signals Only) - Toshiba 42HPX95 Owner's Manual

Selecting the cinema mode (480i signals only)

When you view a DVD (480i signal; 3:2 pulldown processed)
from a DVD player connected to the VIDEO 1, VIDEO 2,
ColorStream HD1/HD2 (component video), or HDMI inputs
on the TV, smoother motion can be obtained by setting the
Cinema Mode to Film.
To set the Cinema Mode to Film:
1. Press MENU and open the Video menu.
2. Highlight Theater Settings and press ENTER.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Navigate Select CH RTN Back
3. In the Cinema Mode field, select Film.
Theater Settings
Picture Size
Picture Scroll -1
Cinema Mode
Auto Aspect Ratio
Reset
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
To set the Cinema Mode to Video:
Select Video in step 3 above.
80
#01E_072-083_4250HPX95 80
Black
(E) 42/50HPX95 *web 213:276
Chapter 8: Using the TV's features
EXIT Exit
Natural
Film
On
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
05.9.12, 10:20 PM