Toshiba 42HP86 Owner's Manual page 46

Symptom
Unable to select a certain channel
Cannot access signal input sources (VIDEO-1,
VIDEO-2, VIDEO-3, ColorStream HD-1,
ColorStream HD-2, HDMI-1, HDMI-2 and PC)
and/or Channels 3 and 4
Multiple images
Poor color or no color
No stereo or SAP sound from a
known MTS broadcast
The remote control does not operate
The side panel buttons do not operate
30A0121A_En_p45-bc 46
Solution
• The channel may be blocked by the CH LOCK feature, or erased with
the add/erase feature.
• Check the VIDEO LOCK feature.
• The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.
• The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
• Make sure the MTS feature (in the AUDIO menu) is set properly.
• Make sure the TV • CBL/SAT • VCR • DVD mode is set properly on the
remote control.
• Remove all obstructions between the remote control and the TV.
• The remote control batteries may be dead. Replace the batteries.
• Check the PANEL LOCK feature.
46
5/26/06, 6:26 PM