Selecting The Cinema Mode; Using The Aspect Feature - Toshiba 50HP16 Owner's Manual

Selecting the cinema mode

When you view a DVD movie (3:2 pulldown processed) from a DVD
player connected to the ColorStream (component video) inputs on the
TV, smoother and more natural motion can be obtained by setting the
CINEMA MODE to FILM.
To set the CINEMA MODE to FILM:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight CINEMA MODE.
SETUP
CINEMA MODE
ASPECT
SIGNAL METER
REVERSE
WHITE
PICTURE SHIFT
SIDE PANEL COLOR
SELECT
4. Press or
5. Press EXIT to return to normal viewing.
To set the CINEMA MODE to VIDEO (off):
Highlight VIDEO in step 4, above.

Using the ASPECT feature

When the ASPECT feature is set to ON and the TV receives a
480i signal, the picture size is automatically selected (as described in
the following table.)
Aspect ratio of signal source
4:3 Normal
16:9 Full
4:3 Letter box
Not defined
If the signal does not include aspect information, the picture size you
selected on page 33 is displayed.
To turn on the ASPECT feature:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight ASPECT.
SETUP
CINEMA MODE
ASPECT
SIGNAL METER
REVERSE
WHITE
PICTURE SHIFT
SIDE PANEL COLOR
SELECT
4. Press or
5. Press EXIT to return to normal viewing.
3X80501A_En_p32-41 36
or until the SETUP menu appears.
FILM / VIDEO
ON
ON
GRAY
ADJUST
to highlight FILM.
Automatic aspect size
(automatically selected
when ASPECT is ON)
Natural
TheaterWide
User-set mode
or until the SETUP menu appears.
FILM
ON / OFF
ON
GRAY
ADJUST
to highlight ON.
Full
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
36
3/7/06, 3:51 PM
INPUT DISPLAY
TV
Menu/Enter
Exit
CT-885