Labeling Channels - Toshiba 42HP86 Owner's Manual

Labeling channels

Channel labels appear above the on-screen channel number display
each time you turn on the TV, select a channel, or press the DISPLAY
button. You can choose any four characters to create a channel label.
To create channel labels:
1. Press TV to select the TV mode.
2. Select a channel you want to label.
3. Press MENU, then press
the OPTION menu appears.
4. Press ▲ or ▼ to highlight CH LABEL.
5. Press to display the CH LABEL
menu. SET/CLEAR will be high-
lighted.
6. Press or to highlight SET.
7. Press ENTER to highlight LABEL.
8. Repeatedly press
character you want appears. Press
ENTER.
Note:
The character will change as follows:
–
SPACE
9. Repeat step 8 to enter the rest of the
characters.
If you would like a blank space in the label name, you must
choose an empty space from the list of characters; otherwise, a
dash will appear in that space.
10. Repeat steps 1-9 for other channels. You can assign a label to
each channel.
11. Press EXIT to return to normal viewing.
To erase channel labels:
1. Press TV to select the TV mode.
2. Tune the TV to the channel whose label you want to erase.
3. Press MENU, then press
4. Press ▲ or ▼ to highlight CH LABEL.
5. Press to display the CH LABEL menu. SET/CLEAR will be
highlighted.
6. Press or to highlight CLEAR.
7. Press ENTER.
8. Repeat steps 1-7 to erase other channel labels.
9. Press EXIT to return to normal viewing.
30A0121A_En_p26-30 29
O P T I O N
or until
O N T I M E R
FAV O R I T E C H
C H L A B E L
V I D E O L A B E L
S E L E C T
C H L A B E L
S E T / C L E A R
L A B E L
or until the
R E T U R N
S E L E C T
C H L A B E L
S E T
L A B E L
+
R E T U R N
–
S E L E C T
or until the OPTION menu appears.
INPUT DISPLAY
O F F
A D J U S T
: C H 0 0 2
— — — —
A D J U S T
E N T E R : S E T
: C H 0 0 2
— — — —
A D J U S T
E N T E R : S E T
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
29
5/26/06, 6:25 PM
Channel
Numbers
TV
Menu/Enter
Exit