Voice Mail Extension Group Assignment - Panasonic KX-TVS100 Quick Installation Manual

4. Enter the extension number that you want this port to have. (The default extension number for
port 1: 165; port 2: 166 ...)
5. Press STORE.
6. Repeat Steps 3, 4, and 5 until all extension numbers are entered.
Conditions: No two jacks on the system can have the same extension number. If you try to enter a
number that is already assigned, you will hear an error tone. Each digital extension connected provides
two Voice Mail ports and must have two different extension numbers assigned.
V M E
OICE AIL XTENSION
This program allows you to assign an extension group number to each Voice Mail port. The default
programming for all ports is Group 01. The group assigned should be used only for ports connected to the
Voice Mail. It is not necessary to change the default programming for Voice Mail extension group assignments
for most applications.
From the System-Prg No. ? screen:
1. Enter [119].
2. Press the NEXT button (Sp-Phone).
Screen Output: VM EXG Group Assn.
3. Press the NEXT button (Sp-Phone).
Screen Output: VM No?
4. Enter the extension group number that you want the first Voice Mail port
to be in.
5. Press STORE.
6. Repeat Steps 3, 4, and 5 until all Voice Mail ports are assigned a group.
7. Press END (Hold).
The required programming is complete and the VPS and KX-TD1232 should be able to
communicate through Digital Integration.
We recommend that the KX-TD1232 system have any optional extension cards and
telephones connected before starting the VPS.
When running the Quick Setup command (Chapter 5) from the VPS, the PBX transmits
the station information automatically. This saves time when programming the VPS.
G A
ROUP SSIGNMENT
6.25