Connections; Connecting Pbx Extensions - Panasonic KX-TVS100 Quick Installation Manual

CONNECTIONS

C PBX E
ONNECTING
The VPS must be connected to the PBX extensions before starting the system. Up to four extensions can be
connected to the VPS. Each PBX extension is inserted into the modular jack on the CO card.
1. Loosen the two screws on the right side of the main unit, then open the front cover (A).
2. Insert modular plug of the PBX extension into modular jack on the CO card.
Make sure the PBX extension is connected to the proper modular jack. Modular jacks on the CO card
correspond to the port numbers as follows:
Assign one of the incoming call services according to the port number.
XTENSIONS
A
CO Card
1
1
2
2
screw
screw
telephone line
modular jacks
SLOT 3
SLOT 2
SLOT 1
POWER
to the extension
port of the PBX
Modular Jack Port Number
Left
Right
Left
Right
PORT 1 PORT 2
1
2
3
4
6.17