Cycles - Kenmore ELITE 110.9586 Use & Care Manual

Auto Dry Preset Cycle Settings
Auto Dry Cycles Temperature Time*
Load Type (Minutes)
HEAVY DUTY High 44
Heavyweight, towels
BULKY/BEDDING Medium 64
Jackets, comforters,
pillows
JEANS Medium 54
Denim jeans, jackets High
NORMAL Medium 41
Corduroys, work clothes
CASUAL Low 36
Permanent press,
synthetics
You can customize your cycles by selecting options.
G
DAMP DRY S IGNAL
gum_ ONN
DELICATE Extra-Low 22
Lingerie, blouses,
washable knit fabrics
*Estimated Time with Auto Dry Level (Normal) setting. Time will
vary depending on load type and load size.
db
WRINIQ_ GUARD
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to prevent overdrying or remove
partially dry items that may need ironing.
The DAMP DRY SIGNAL is useful when drying bedsheets/linens
in a mixed load or large items in the "Bulky/Bedding" cycle. When
the signal goes off, open the door to stop the dryer, rearrange the
load inside the dryer, close the door and restart the dryer to finish
the drying cycle. Rearranging the load will aid in the drying
process.
For the "Bulky/Bedding" cycle, the DAMP DRY signal is preset to
ON.
NOTE: The Damp Dry Signal is available only with the Auto Dry
Cycles.
Use Manual Cycles to select a specific amount of drying time and
a drying temperature. When a Manual Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing More Time or Less Time. (See "Changing
Cycles, Options and Modifiers.")
Timed Dry
Use this cycle to complete drying if items are still damp after an
Auto Dry Cycle. Timed dry is also useful for drying heavyweight
and bulky items, such as bedspreads and work clothes.
Lightweight garments, such as exercise wear, can be dried using
Timed Dry on a low temperature setting.
EXPRESS DRY
TM
Use this cycle for drying small loads or loads that need a short
drying time,
WRINKLE GUARD s
WRINKLE GUARD _ prevents wrinkles that form when you cannot
unload the dryer promptly at the end of a cycle. During this
option, the dryer stops tumbling and then tumbles again for a
brief period.
• Press WRINKLE GUARD "_to get up to 21/2hours of heat-free,
periodic tumbling at the end of a cycle.
• Stop WRINKLE GUARD ®at any time by pressing WRINKLE
GUARD "_or opening the dryer door.
For the Casual Auto Dry Cycle, WRINKLE GUARD ®is preset
to ON. The other Auto Dry Cycles will retain the WRINKLE
GUARD ®setting. For example, if you select WRINKLE
GUARD ® in the Normal cycle, WRINKLE GUARD ®will be on
the next time you select the Normal cycle.
NOTE: If you do not select WRINKLE GUARD ®, the dryer stops
after cool down.
Touch Up
Use this cycle to remove wrinkles from items, such as clothes
packed in a suitcase or items wrinkled from being left in the dryer
too long.
Manual Preset Cycle Settings
Manual Cycles Temperature Default Time
Load Type (Minutes)
TIMED DRY High 40
Heavyweight, bulk,
bedspreads, work clothes
EXPRESS DRY
TM
High 27
Small loads
TOUCH UP Medium 20
Remove wrinkles High
Use Modifiers to select temperatures for the Manual Cycles.
Press Temperature
until the desired temperature setting glows.
Temperature modifiers cannot be used with the Auto Dry Cycles.
• HIDH
• MEDIUMHI6H
• MEDIUM
•LOW
• EX'mA LOW
• AIR DRY
_MPERA'PJRE
eAANL_L c /r_LE5 OffLy]
18