Replacing Ignitor - PRG Best Boy 4000 Service Manual

Replacing Ignitor

Parts:
69.3180.0805.1 / 2.3749A-P35 1 EA
Tools & Supplies:
#2 Phillips screwdriver
Loctite #242 (06.6008.0001)
WARNING: Remove power from luminaire before performing any maintenance procedures.
To replace the ignitor:
Step 1. Remove power from luminaire.
Step 2. Remove pan-side yoke leg cover. (Refer to
Step 3. At Ignitor, disconnect four cables.
Step 4. Remove Ignitor by removing four 6-32 x 1-1/4" PPB screws.
Step 5. Replace Ignitor by doing steps in reverse. Apply Loctite 242 to 6-32 x 1-1/4" PPB screws.
®
72 BEST BOY 4000 SPOT LUMINAIRE FIELD SERVICE MANUAL
IGNITOR, BEST BOY, WITH LABEL
"Removing Yoke Leg Covers"
Ignitor
6-32 x 1-1/4" PPB Screw (4)
- Apply Loctite 242
CAUTION:
Figure 3-42: Removing the Ignitor
on page 26.)
LAMP
Use anti-static precautions
when working with PC boards.