Replacing Rear Housing Fan - PRG Best Boy 4000 Service Manual

Replacing Rear Housing Fan

Parts:
25.9816.0995 / 2.3749A-P95
Tools & Supplies:
#2 Phillips screwdriver
Wire cutters
Cable Ties
Loctite #246 (06.6019.0001.01)
WARNING: Remove power from luminaire before performing any maintenance procedures.
To replace the rear housing fan:
Step 1. Remove power from luminaire.
Step 2. Remove Aft Cover. (Refer to
Step 3. At Aft Bulkhead, locate Rear Housing Fan cable as shown in Figure 3-23. Cut cable tie which secures cable
to bulkhead and disconnect cable.
Cable Tie
1 EA ASSY, REAR HOUSING FAN
"Removing Aft Cover"
Aft Bulkhead
FAN # 1
Figure 3-23: Removing Rear Housing Fan
on page 25.)
Rear Housing Fan Assembly
6-32 x 1/4" PPSS Screw (2)
- Apply Loctite 246
®
BEST BOY 4000 SPOT LUMINAIRE FIELD SERVICE MANUAL 49